Products - Process Cooling

	Diaphragm Metering Pumps Series 500 and 600 hydraulically balanced metering pumps and Series 7000 mechanically actuated metering pumps are designed to serve the water and wastewater markets.

	Solenoid-Driven Chemical Metering Pumps Pumps in the LMI Roytronic Series A line are suitable for applications up to 250 psi with capacities between 0.001 and 2 gal/hr.

	Air-Operated Double-Diaphragm Pumps The company offers air-operated diaphragm pumps with plastic solid housings.

	Digital Thermohygrometer Model THI-10 measures relative humidity and ambient temperature.

	ANSI Centrifugal Pump Model 811CC (close coupled) offers the features of the company's standard 811 ANSI pumps with a smaller electrical motor encased in a compact footprint.

	Multi-Gas Monitor Innova 1316 measures up to five gases, including oxygen, and can be used for different measurement tasks by selection of relevant modules and sensors.

	Spur Gear Flowmeter MicroFlow is designed to maintain high accuracies at low flow rates, even with low viscosity liquids.

	Silicone Thermal Gel Sheets Sheet-type silicone thermal gel sheets control and dissipate heat in electronic component applications.

Electric Pump With a high flow rate (up to 10,000 gal/min), the 12" DV300c-E Power Prime handles 3" solids, has a variable-frequency drive, and produces total dynamic head up to 190'.

	Pump Tanks Line of pump tanks incorporates Panasonic PLCs, which enables single-point operation of chilling and tower systems.

Crossflow Cooling Towers FRS/FWS Series’ single-, double- and multi-cell configurations are designed for industrial, institutional or commercial loads.

	Modular Chillers with Multiple Compressors Modular chillers are built with multiple smaller compressors that are connected together to offer the same overall capacity as a large chiller.

	Thermocouple Temperature and Pressure Dataloggers Series OM-CP-PRTC210 accepts thermocouple Types J, K, T, E, R, S, B and N.

Full-Lift-Type Valve Series 1800A is a relief valve that attains full stable lift at only 10 percent overpressure.

Cooler Uses Adiabatic System The Ecodrygel EDK uses an adiabatic system, so it can operate in any environment.

	Side-Mount Cooling for Electrical Enclosures Models DTS 31x5 and DTS 32x5 \enhance the company’s DTS 3000 Series by adding enclosure coolers with 5,000 to 7,000 and 9,000 to 12,000 BTU/hr cooling ranges.

	Dye Injection Kit Technicians can add the exact amount of fluorescent dye into refrigeration systems without wasting a drop by using the EZ-Ject.

	Plate Heat Exchanger Gaskets Gaskets fitted to plate heat exchanger are offered in three material designations to satisfy challenging applications.

Tunnel Freezer The CES Tornado is designed and built to meet strict EU regulations including safety and hygienic standards (EU EN-1672-2).

Dehumidification Systems

Energy-efficient desiccant dehumidifiers with BrySmart control technology reduce energy usage up to 45 percent, according to the manufacturer. The control technology also can be retrofitted to existing systems to provide the benefits of improved operation and lower energy costs. The controls optimize the performance of the company’s EcoDry dehumidification systems over a range of operating conditions, from full to off-peak loads, by monitoring humidity and adjusting the operating parameters automatically.

Bry-Air Inc., (740) 965-2974

	Portable Chillers Iceman SC Series have one-quarter to 35-ton cooling capacities and a scroll compressor with more than 50 percent fewer moving parts than standard reciprocating compressors.

	Leak Detection Flashlight OPX-3000 OPTIMAX 3000 has a focused beam to make it easier for technicians to pinpoint refrigerant leaks.

	Wireless Serial Communications System The WT30 system consists of one master and multiple slave I/O stations with expansion capability for up to 64 slaves (over 1,000 I/O).