Cooling towers dissipate process heat in most large manufacturing facilities. Problems with efficient heat transfer, cooling equipment failure and pathological risks to employees can most often be traced back to an issue with suspended solids. Side-stream filtration is the most commonly used method of maintaining gross control of suspended solids. Historically, cooling systems have relied heavily on cyclonic separators for the removal of heavy inorganic particles and granular media filters to control soft organic matter. Automatic self-cleaning screen filter technology provides a barrier to both organic and inorganic solids regardless of specific gravity or rigidity and requires very little energy to operate. In addition, they conserve coolant additives by using very little coolant liquid for the self-cleaning process and do not have to be taken off-line during the cleaning cycle.
The use of weave-wire screens as the filtering media provides a positive removal system retaining all particles larger than the filtration degree of the screen and many smaller particles due to the filtration effect of the filter cake that builds on the screen element surface between cleaning cycles. During the efficient suction cleaning cycle, the filtration process is uninterrupted; thereby, providing filtered water downstream at all times, eliminating the need for redundant equipment. If any problem should occur with the filter, the controller will sense this and open the built-in bypass valve to provide a continuous flow of water to the new chiller. Full stream protection, automatic self-cleaning process, automated bypass system and low maintenance were just the qualities the engineers were looking for in a protection system for the new magnetic chiller.
About Orival Inc.
Orival filters have been installed on process cooling applications worldwide for over twenty years. Industries such as petrochemical, food and beverage, steel, mining, automotive, paper, power generation and ethanol production are just a few industries using Orival filters for water treatment in process cooling systems. Orival Inc. provides a complete line of automatic self-cleaning filtration systems with sizes ranging from 0.75" to 24" and filtration degrees from 3000 microns down to 10 microns. Orival filters are used to protect cooling towers, chillers, membrane systems and heat exchangers, spray systems, furnaces, internal combustion engines and mold jackets. Visit www.orival.com; contact email@example.com or call (800) 567-9767.