American Cooling Tower

Factory-Assembled, Induced-Draft Cooling Tower Line

ACX Series has been certified under CTI Standard 201 validation number 13-38-02. With the addition of the ACX Series certification, the company becomes only the third manufacturer based in the United States that offers both counterflow and crossflow models within the program, according to the company. The crossflow cooling tower line includes 69 single-cell models ranging from 102 to 1,043 nominal tons. Multiple-cell versions of the models also are certified and do not require a derate in capacity.

800-371-5959 • www.americancoolingtower.com

Baltimore Aircoil Co.

Counterflow Cooling Tower Allows Dry Operation in Cold Weather

Model PF2 induced draft, counterflow unit is designed for systems that benefit from dry operation in severe cold weather. The counterflow cooling tower offers the flexibility to operate in evaporative cooling mode to minimize energy usage or in dry mode for extreme winter conditions. The company’s SmartSpray technology optimizes spray coverage to fully wet the coil and provide up to 60 percent reduced pump energy over competitor units. It is suited for counterflow unit replacement or expansion projects.

 (410) 799-6200 • www.baltimoreaircoil.com

Dry Coolers Inc.

Evaporative Cooling Tower Systems Have Stainless Steel Indoor Sump

Evaporative systems provide cooling below dry bulb ambient temperature. The systems cool by evaporating a small portion (approximately 1.5 percent of flow) of recirculating water. It maintains temperature to within 3°F of wet bulb ambient. Features include a stainless steel indoor sump for freeze protection; stainless steel or fiberglass cooling tower construction; high temperature fill; backup pumps; isolated plant water systems via heat exchanger or closed circuit evaporative tower; filtration; and cooling tower stands.

 (248) 969-3400 • www.drycoolers.com

Delta Cooling Towers

Molded Cooling Towers with Efficient Direct-Drive Fans

Series TM cooling tower line expands unit capacity up to 2,000 cooling tons. The engineered plastic molded tower provides longer life without the maintenance and downtime typically associated with metal towers. Features include a molded, seamless leakproof sump with I-beam pockets; non-clog large orifice spray nozzles; double-wall seamless high-density polyethylene shell; and efficient direct-drive fans. The modular design allows various cells to be isolated if required. All towers from the company are supplied with a 20-year warranty on the tower casing and are CTI certified.

 (973) 586-2201 • www.deltacooling.com

Composite Cooling Solutions (CCS)

Fiberglass Field-Erected Crossflow Cooling Towers

For applications where extended equipment life is required, the Pegasus provides corrosion protection as well as optimized structure, strength and thermal performance. The patented fiberglass-reinforced polyester (FRP) structure is engineered to minimize structural air restriction. The field-erected, crossflow cooling tower has a five-year warranty on the mechanical equipment, FRP structure, equipment support, and fill.

 (817) 246-8700 • www.compositecooling.com