TM Series induced-draft, counterflow models are available in single unit capacities from 250 to 2,000 cooling tons, and the plastic cooling towers can be clustered to provide much greater capacities. Suited for uses such as direct chill processes that include a continuous loop without heat exchangers, the high density polyethylene (HDPE) cooling towers serve as an effective alternative to the metal-clad cooling towers. In one direct chill process, after the cooling water leaves the spray system, it is re-cooled solely by means of a cooling tower. The only coolant involved is normal tap water with a small amount of corrosion inhibitor added plus a minor pH adjustment. The HDPE plastic fill can withstand high temperatures (160°F).

Delta Cooling Towers Inc.

800-289-3358

TM Series induced-draft, counterflow models are available in single unit capacities from 250 to 2,000 cooling tons, and the plastic cooling towers can be clustered to provide much greater capacities. Suited for uses such as direct chill processes that include a continuous loop without heat exchangers, the high density polyethylene (HDPE) cooling towers serve as an effective alternative to the metal-clad cooling towers.

DeltaCoolingTowers_IN

In one direct chill process, after the cooling water leaves the spray system, it is re-cooled solely by means of a cooling tower. The only coolant involved is normal tap water with a small amount of corrosion inhibitor added plus a minor pH adjustment. The HDPE plastic fill can withstand high temperatures (160°F).

Delta Cooling Towers Inc.
800-289-3358
www.deltacooling.com