Clampseal and Camseal automated vent and drain valves – available in 0.5 through 4” sizes with no welds to remove and replace – automate processes, improve efficiency, ensure precise closing, extend product life and reduce labor costs. These combinations eliminate excessive steam dumping, reduce treated water replacement and allow for remote monitoring and control. Automated globe valves, which come standard with removable yokes for actuator mounting, are available in angle, Y- and T-pattern configurations. Conval_IN

Seats may be cut, ground and lapped. Discs can be turned or replaced and lapped to the seat. Top-entry ball valves have a replaceable cartridge with a seat and ball that is factory-tested to ensure tight shut-off. The valve has an indicator window and marked stem to ensure proper in-line ball alignment in open and closed positions.