Tube and Pipe Beveler Preps Small-Bore, Heavy-Wall Tubes
The clamping end-prep tool is used for beveling, flat facing and J-prepping small-bore, heavy-wall tubes. A rugged clamp mounts onto the outside of a tube, evenly distributing the holding power of the C-Hog Millhog. Developed for machining highly alloyed tubes, the tool is 1.75” wide to allow it to fit tight areas. It has a 1.07-hp pneumatic motor that runs at 130 rpm and produces high torque. The beveling tool can be used to prep tube and pipe from 0.5 to 3” OD.