Liquid-to-air heat exchangers have high density fins to maximize heat transfer, allowing the liquid to be cooled to lower temperatures. The heat exchanger fins and tubes are made of copper and stainless steel to be suitable for a variety of fluids, including water, dielectric fluids and custom designed heat transfer fluids. Each of the seven heat exchanger sizes is available with or without a fan. The heat exchangers have silver-solder brazed joints and have been internally cleaned and externally coated for corrosion protection. They have heat transfer capacities up to 250 W per 1°C difference between the inlet liquid and the inlet air temperatures. The heat exchangers allow heat from a fluid (either a liquid or a gas) to pass to another liquid or gas without the two fluids having to mix or come into direct contact.
Advanced Thermal Solutions (ATS) Inc.